Access Point Cisco AIR-CAP3502I-T-K9 T 802.11a/g/n Ctrlr-based

AIR-CAP3502I-T-K9 - Access Point Cisco AIR-CAP3502I-TK9 T 802.11a/g/n Ctrlr-based AP w/CleanA

AIR-CAP3502I-T-K9
Dual-band controller-based 802.11a/g/n

802.11n Version 2.0 (and Related) Capabilities
2x3 multiple-input multiple-output (MIMO) with two spatial streams
Maximal ratio combining (MRC)
Legacy beamforming
20- and 40-MHz channels
PHY data rates up to 300 Mbps
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Cyclic shift diversity (CSD) support

Maximum Number of Nonoverlapping Channels
 
2.4 GHz
802.11b/g:
20 MHz: 3
802.11n:
20 MHz: 3
 
5 GHz
802.11a:
20 MHz: 21
802.11n:
20 MHz: 21
40 MHz: 9

Available Transmit Power Settings
 
2.4 GHz
23 dBm (200 mW) CCK Only
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
 
5 GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)

Integrated Antenna
2.4 GHz, Gain 4 dBi, internal Omni, horizontal beamwidth 360°
5 GHz, Gain 3 dBi, internal Omni, horizontal beamwidth 360°

External Antenna (sold separately)
Certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz).
Cisco offers the industrys broadest selection of 802.11n antennas delivering optimal coverage for a variety of deployment scenarios.

Interfaces
10/100/1000BASE-T autosensing (RJ-45)
Management console port (RJ-45)

Indicators
Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

System Memory
128 MB DRAM
32 MB flash

Input Power Requirements
AP3500: 44 to 57 VDC
Power Supply and Power Injector: 100 to 240 VAC; 50 to 60 Hz